Tag Archives: pond pumps

Vortex Impellers

If you been in the market for a new pond pump, it’s possible that you’ve noticed some pumps having a vortex impeller.   While commonly used in the sewage industry because of their ability to pump solids, vortex impellers work well in the ponding industry for the same reason.

TidalWave2 from Atlantic Water Gardens

Vortex impeller’s design allows for the recessed impeller to create a 2 stage process:

  • First, the impeller produces a swirling whirlpool action, or a liquid vortex, in the water in and around the vanes.
  • Second, a secondary vortex is created in the volute that pushes the water out to discharge.

The likelihood of wear to the impeller is severely dimensioned because very little of what’s being pumped comes into contact with it.  This also makes it easy to pump stringy materials.

What are Hybrid Pumps?

What are Hybrid Pumps?

The term hybrid is becoming commonplace in many industries and there is no exception in the ponding world either.  A hybrid pump utilizes the power associated with a direct-drive pump combined with the electrical efficiency of a magnetic induction pump (mag drive pump).  Understanding these 2 separate pumps that combine to make the hybrid should help you to see why these hybrid pumps might just be great addition to your pond.

Direct Drive Pumps

The rugged direct drive submersible pump has long been used in the wastewater industry where they are known for their ability to pump solids while providing high head heights.  They are named direct drive because their impeller is attached directly to the motor, along with several seals on the drive shaft to ensure the motor is kept dry.  All this power has a downfall: high wattage expenditures-especially the older models that have flat-bladed synchronous impellers.  Synchronous impellers rotate in either direction, requiring that the impeller be flat-bladed to allow for it to spin in either direction.  Flat blades are not efficient but luckily, there have been many improvements on this design.

A huge energy efficient improvement that was made lately on the direct drive pumps was the design of asynchronous impellers.   Asynchronous impellers rotate in one direction only allowing for an efficient curved impeller blade.

Mag Drive Pumps

The magnetic induction pumps are a more energy efficient pump but also have lower head heights as a result of their inefficient synchronous impeller design.  As a general rule, most mag drives are effective up to 2000 gph with a maximum head height of 15’. The replaceable magnetic impeller assembly, when charged with electricity, will spin the impeller by magnetic attraction.  Clean, or pre-filtered water is needed with these pumps as they can’t handle solids.

Hybrid Pumps

A hybrid pump utilizes the best of both of both worlds:  it uses the direct-drive style asynchronous impeller with a magnetic induction motor used by the mag drive pumps.  The result is a high efficient pump suitable for low to medium head heights.

Check out our selection of Hybrid Pumps here.

New on Our Website: Pond Reference Calculators

Check our ever-growing reference area, with our new Pond Reference Calculators, including:  Head Pressure Calculator and Electrical Cost Calculator. 

The Head Pressure Calculator will prompt you for vital questions that will help assure you make a sound decision when it comes to knowing your current pond system’s head pressure. 

The Electrical Cost Calculator can help you determine how much a pump will cost you daily and monthly.  This calculator can be used for ANY electrical appliance.  It’s a great way to determine which pump or electrical product will be the most efficient yet still serve your needs.


Differences between Pond Pumps

Selecting a pond pump can be quite a task when you consider all of the factors that are associated with this purchase.  There are several different categories of pond pumps, which are outlined below.  Each one of these categories serves a particular application best.  Finding the best pump for your application will help assure electrical efficiency, increased pump and less hassles altogether.

Magnetic Drive Pumps

Mag drive pumps, as they are commonly referred, offer more electrical efficiency but are not as powerful.  These sealless pumps transmit torque by magnetizing the impeller.   They find great application in waterfall and streams that meet their low and medium head requirements.  

Direct Drive Pumps

These pumps are more powerful, offering a more maximum head height than mag drive pumps but also use more electricity as well.  They are used quite commonly in larger waterfalls and streams.

Hybrid Pumps

These new generation pumps offer great performance and high efficiency.  They boast that they are low maintenance and extremely quiet.  To date, there are few companies manufacturing these pumps.  

Statuary/Fountain Pumps

These pumps are commonplace in fountains, spitters and other stand-alone applications.  

External Pumps

These pumps are installed outside the pond and are used on larger-sized ponds.  Many of these pumps use priming pots on the intake to assure that the pump stays primed.