Tag Archives: project

From Drab to Glam – Shed Makeover on a Dime

Shed - Before

Shed- After

One of my home projects for the summer was to “resurrect” my shed from it’s desitute state to a more eye-pleasing state.  The shed, orginally blue, to the match the neighbor’s house was painted to match my house.  No, I didn’t steal their shed in middle of the night!  Actually, the neighbor’s home was in foreclosure and the current owner was willing to sell this shed.  So, the purchase was made.     

Since my budget was small, I did the following:   

  • Painted the exterior which took 1-1/2 gallons of paint for the siding and 1/2 gallon of paint for the trim. $75
  • Replaced the 2×4 boards on the doors.  The previous boards were rotting.  $10
  • Lined the window box with roof flashing.  This is a cool idea that I saw in the Backyard Living Magazine.  The flashing was cut with a pair of tin snips to resemble scallops (look above the After photo).  I then painted the flashing and lightly sanded the flashing for a worn look.  When handling roof flashing, be sure to wear gloves and any other protective items needed as it has sharp edges.  I then nailed the flashing to the existing window box for a new look. A roll of roof flashing costs $20.
  • Replaced door hardware. $15
  • Placed mulch around plants.  $10
  • Adorned the base of the window box with existing decorations.

 Total Cost of this Project: $130.00

Ways to save even more money on this project:

  • Consider checking the paint clearance aisle for colors that might match your desired color.  I have bought paint this way.  This can be a money savings. 
  • Check for broken bags of mulch which are marked down considerably.
  • Revive the old hardware by using an abrasive wool pad.  Paint if desired.
  • Get creative!  It’s fun!

Planning for a Successful Pond

Are you considering the addition of a pond at your home?  The key to a successful and healthy pond involves thorough planning.  Take the time to read many articles and talk pond owners to get a better understanding of all that is involved.

Use this article to become acclimated with some of the basic information pertaining to planning your own pond.  It can be an extremely rewarding hobby. 

What Type of Pond Do You Want

More specifically, what type of aquatic life do you plan to have inhabiting your pond?  This is a crucial first step in the planning process because the requirements are vastly different for a koi pond versus a goldfish pond versus a simple water garden.  For example, a healthy koi pond requires a larger, deeper pond with preferably a bottom drain for better filtration as opposed to a goldfish pond.   

Design on the Size and Shape of your pond

Creativity is all yours when it comes to the shape of your pond.  Keep in mind that it is important to have good water flow throughout the pond.  So avoiding square corners that will trap dirt and create stagnant, non-moving areas would be ideal.  For example, keeping a waterfall on the opposite side of the pond across from the skimmer box would provide good water flow.

If you are considering a koi pond, most koi enthusiasts recommend a minimum size of 1000 gallons and at least 3 feet deep, and a depth of up to 6 feet is even more desired.  This depth is important to help keep koi safe from their natural predators, raccoons and heron.  It also helps to adjust for temperature fluctuations in colder winter climates.

Consider the incorporation of ledges or shelves in your pond to place plants, by digging a shelf around the inside perimeter of the pond. 

Determine the Location

There are several important factors that you should consider to help determine your pond location. 

Safety- Water is a natural attraction for children; therefore, it’s extremely important to reduce the chance of unsupervised children gaining access to the pond.  One simple solution is to build it inside a fenced area.

Sunlight Requirements- Certain water plants, such as water lilies, require at least 4-6 hours of sunlight daily.  Most koi enthusiasts won’t put water plants in the pond because koi do typically eat the plants.  But keep in mind that water lilies are an excellent way to shade your pond and add some definite beauty.  This shading also helps to control algae, as well as, control the water temperature.  Your pond should not be placed under a tree where leaves and debris can be allowed to drop into the pond.  As leaves decompose, they produce toxins that are toxic for your fish.  A good sun-shade balance should be maintained. 

Buried Utilities- Always call all utility companies before digging to assure no buried cable lines, gas and phone lines, etc. will interfere with your future pond site.

Electrical Requirements- A healthy pond will need an electrical source close to run, at minimum, a pump which will circulate the water through filtering devices. 

Elevation of the Land- The pond surface level should always be higher than the surrounding area to avoid water runoff into the pond.   Runoff from fertilized yards, farm fields and rooftops shouldn’t be allowed to flow into the pond.  Building a lip around the perimeter of the pond will deter this water runoff.    

Determine the pond equipment needed

Pump:  The pump is a vital part of any pond.  It is responsible for circulating water throughout the pond and the filters.  While doing this, it also provides critically-needed oxygen to the fish in the pond.  Some ponds have more than one pump, one for each filtering method. 

Filters:  There are two types of filtration, biological and mechanical.  They both filter the water in 2 completely separate ways.

Biological Filter- This filtration method uses beneficial bacteria to detoxify the organic waste present in your pond.  The filter medium in the “bio” filter provides surface areas for these beneficial bacteria to grow.  The detoxification process occurs as the water is filtered past the filter medium.  Commercial bio filter units are available, while others make their own using filter medium such as lava rocks.  There is much debate on using lava rock for this purpose though.  So, always make an informed decision based off of a well researched plan that fits your needs.

Mechanical Filter- This filtration method physically traps dirt and debris as the water passes through the filter.  The filter medium is usually in the form of net, foam, mesh, brushes or even a screen-like material.

Skimmers- Skimmers do just that, they skim floating dirt and debris off the water surface.   Skimmers are becoming deemed more as a necessity than in previous times.  These skimmers also offer a hiding place for your pumps, as they are designed to incorporate the pumps in the base of them.

Ultra-violet Clarifier- UV lighting, commonly used in koi ponds, is used to aid in algae control.  The microscopic algae-mixed water passing through ultra-violet light will die.  These lights will only kill existing algae cells, not prevent new from forming.  So if conditions are right for algae to produce, it will.  Understanding how to maintain an algae free pond will help to assure that the UV clarifier works at its best.  While there are skeptics that say this type of lighting shouldn’t be necessary, you will have to make that decision based off of your own research and needs. 

Pond Liner- One common way of retaining water in your pond is to use a pond liner made of a material known as EPDM.  Liners will be measured based on their thickness, common thicknesses of either a 45 or 60 mil are desired for this application.  While some pond owners choose a more permanent bottom on their pond made of concrete, the average pond owner will have great success with an EPDM liner. 

Draw an Illustration

Take the time to draw out and illustration, showing all electrical needs, dimensions, surrounding buildings, etc.  Get an idea if it is truly going to work. 


Still overwhelmed? Consider hiring a professional to design the pond only.  Take this design and build it yourself, if you feel qualified.  Some professionals will also charge a nominal fee to oversee your project at different steps in the build as you need them.  This can save you a great deal of money, yet give you a well designed pond. 

While this article just skims the surface on the proper planning of building a successful pond, it should give you a better understanding of the proper planning needed.  As I stated earlier, it is a very rewarding hobby!

Building a Raised Garden Bed


Are you considering building your own raised garden bed?  Consider some of the advantages to raised bed gardening:           

  • No soil compaction due to the fact that walking between the aisles is eliminated, as done in a traditional garden.  Consequently, the overall plant’s root health and water drainage and oxygen flow will increase.  This can result in larger, healthier plants.
  • The reduction of back strain.
  • It is said to extend the growing season because your soil will warm up sooner.
  • More plants can be grown in a smaller area because there won’t be a need for a walk path between the plants. 
  • Controlled soil quality
  • Better weed control

 Consider some of the disadvantages to raised bed gardening:           

  • Time and cost to make your own
  • You will need access to proper tools to build
  • Watering needs will likely increase   

 Some important ideas to keep in mind:           

  • You should make the bed only as wide as you can comfortably reach to the center.  A good width is between 3-5 feet.   
  • Your depth will also depend on the plants you decide to harvest.  Deep-rooted plants, such as carrots and radishes, will need a minimum of 8 inches.  While other plants, such as tomatoes and squash, have been grown in 6 inches of soil.  Obviously, the deeper your roots are allowed to grow will result in a healthier crop.

Select your location

Your sun requirements will depend on the plants you choose, but most garden vegetables require an average of 8 hours of sunlight.  Also make sure you are close to a water source.  Being on level, well-drained ground is important as well.           

If building multiple raised beds, be sure to leave at least 3 feet between the beds to allow for mowing and walking.            

Select your material

There are many different materials that can be used to build a raised garden bed.  This will depend on your specific desires and materials you might have on hand.  You should research several plans and see which fits your needs best.  Here are a few materials that work well:     

  • Concrete blocks, stones or patio edgers- This can become a more permanent garden fixture by applying mortar between the stones of your choice.  Build them up to the desired height. 
  • Wood- It is important to use a rot-resistant wood, such as cedar or redwood.  It is not recommended to use pressure treated woods as the chemicals currently used to treat the wood contain Alkaline Copper Quaternary (ACQ) or Ammoniacal Copper Citrate (CC) and Copper Azole (CBA), to name a few.  Older treated wood that was used residentially contained Chromated Copper Arsenate (CCA) and was widely scrutinized for its use of the known carcinogen, arsenic.  You wouldn’t want these chemicals leaching into your plant’s water source.    

Build Your Raised Garden Bed

While there are many sizes and designs for garden beds, the detailed instructions below are how my husband and I built our 1’x4’x8’ raised garden bed using cedar.  Look at many plans and determine which best fits your needs.           



  (3)—1”x12”x 8’ cedar boards with 1 of these boards being cut in half to give you (2)-4 foot long pieces (as shown in the picture)           

  (1)—4”x4”x 8’cedar post with this post cut in 4 equal pieces of 2 feet each (Most hardware stores will cut these pieces for you at minimal cost)           

24 galvanized wood screws           

Drill and a drill bit (making sure the drill diameter is smaller than the screw size) to pre-drill the holes to avoid any cracking of the wood           

C-clamps to hold post and board together while drilling and screwing           



Inverted, Completed Raised Bed Built in the Garage
Inverted, Completed Raised Bed Built in the Garage

Our raised garden bed was built on the garage floor, inverted.  In other words, the top facing boards were laid onto the garage floor and posts that are sticking up will be buried in the ground (shown in the completed assembly picture).  The garage floor gave us a level surface from which to build.             

 Attaching Post and BoardStart with one post and one board.  We started with one of the 8 foot boards and one of the posts.  Attach the c-clamp, assuring that the edges of both board and post are flush with one another.  Pre-drill and screw the two boards together using 3 screws for each side (see above picture).  Your short-sided board (4′ board) will be placed flush with the outside of the previous long-sided piece you just attached.  Continue this sequence through until completion.         

 Prepare your site 

Prepared garden area


Remove the sod from your future garden by digging down just below the roots and remove.  If you have clay soil, it’s wise to dig down at least 6 -12 inches to loosen up the soil.  This allows for better drainage.  Some people have had great success with lining the bottom and sides with a barrier of wet newspaper over the area to prevent weeds from growing.  Using a post hole digger, dig a hole for each of the posts.  You can estimate your hole location by placing your assembled garden bed in it’s future location and outline the post holes with string or spray paint.  I actually left my bed sitting on top of the grass long enough that the grass died under each post, so I knew exactly where to dig!  Dig deep enough to bury the posts completely.          

Carry the raised bed out to your desired location.   Place posts into the post holes that you dug.  Fill your bed with a mixture of compost and soil to about 1 inch of the top.

Controlling Algae Growth in a Pond

An established pond will most likely experience algae growth at some point. Moderate amounts of some forms of algae are actually healthy for the overall pond ecosystem, but maintaining control over that amount is important. Excessive algae can rob your pond of oxygen, causing fish illness or worse, fish death.

Algae are simple structured plants that have no root systems, leaves or any of the other similar characteristics seen in higher plant species. The two most common types of algae are planktonic algae and filamentous algae.

Planktonic algae can be identified by green, blue-green, yellow-green or even red colored water, also known as a bloom.  Blooms can encompass the entire surface of a pond and resemble a pea soup consistency if left untreated.

Filamentous algae initially form around the perimeter and the bottom of the ponds in the spring in a mat-like fashion and take on the characteristic of being stringy. It’s common to see this type of algae on rocks and even waterfalls, making these surfaces slippery. These algae provide no real benefit to a pond’s ecosystem.

Algae thrive off of:

  • Excessive sunlight
  • Low oxygen-high carbon dioxide levels
  • Excessive nutrients

Excessive Sunlight

Excessive sunlight helps to fuel the photosynthesis process, which also relies on carbon dioxide, and water.

Long Term Solutions: The main goal here is to allow less sunlight to enter the pond. One natural way to achieve this is to add shade bearing plants, such as water lilies, to your pond. These plants can easily cover a large percentage of the water surface and will also offer a natural protection from predators for your fish, as well as, provide a great spawning environment for your fish.  Plants also naturally compete with algae for nutrient requirements.  So, plants are a win-win situation for your pond.

Another option is to add shade dye to your pond. This eliminates how much sun can penetrate the water, inhibiting the photosynthesis process.

Excessive Carbon Dioxide

Excessive carbon dioxide fuels the photosynthesis process.

Long Term Solutions: Increase oxygen levels by providing aeration and filtration. Air diffusers and waterfalls are some examples of ways to infuse oxygen into the pond. It’s also important to remove decaying plant life, as this robs oxygen levels.

Proper mechanical and biological filtration can be achieved through the use of skimmers, filter media, UV lighting and beneficial bacteria; just to name a few.  Beneficial bacteria are a topic all by themselves.  To understand the importance of beneficial bacteria, a great reference article, “Your Pond’s Nitrogen Cycle” is here for your reading.

Excessive Nutrients

Excessive nutrients that help algae to thrive consist of nitrogen and phosphorus. Several sources for these nutrients are local phosphorus-rich fertilized areas, such as treated farm fields or yards, that wash into the pond. Other sources include nitrogen found in excessive uneaten fish food, decaying vegetation and fish waste.

Long Term Solutions: Eliminating or maintaining these nutrient sources properly will help alleviate that part of the problem. Clean all decaying vegetation from the water and only feed fish the required amount of food as recommended by the food manufacturer.

Please Note: If a quick fix solution is needed to control algae, there are algaecide products available. Be aware that after treating your pond with these products, the decaying of the algae will result in additional oxygen loss due to the decomposition process. This can lead to fish kill. Always follow all instructions on any products you use.


Making your Own Water Feature

Water Feature 

Who doesn’t love the sound of water on a nice warm day? While there are some beautiful water features that you can buy, the cost might not be in your budget. If this is your scenario, then simply make your own. With as little as 2 items that you might already have around your house, you can have your water feature up and running in as little as 10 minutes. See how to do it:  

Items needed:

1. A Container – I used this old crock that I’ve had lying around. It’s durable and it holds water. Having a water tight container is obviously a necessity. So get creative with existing containers that you have.   

2. Pump- If you don’t have one of these pumps, they are reasonably priced. You can pick one up for under $10. This particular pump has a head lift of 2.1 feet. This measurement, head lift, is the height the water will be propelled out of the pump, not including frictional forces.  

3. Landscaping brick or other elevation device (optional) – A landscaping brick works well to elevate the pump so it’s closer to the surface of the water. This gives the water that “bubbling” effect. You might not need this if you have a pump that has a bigger head lift.   

4. Aquatic Plants (optional) – Plants will give your water garden a more natural feel. They can also help to hide your pump power cord. I originally planned to incorporate plants into my water feature but my dogs have decided they like to drink from it!  


Clean your container thoroughly with soap and water. Place your container in its chosen final location. If you’re using a landscaping brick, center the brick in the bottom of the container. Fill your container with water and place the pump on the brick. It’s  

Assembling Your Water Feature

that simple. 

Other Considerations:

  • Over the course of the summer, evaporation and animals drinking from the water feature will result in water loss. Your water level needs to be kept above the pump at all times. Failure to maintain this water level will most likely result in a pump failure.
  • Controlling algae is another concern. Maintain your water feature by draining in and thoroughly cleaning it with soap and water as needed. Be cautious about using chemicals, like chlorine, especially if you are allowing animals to drink out of this container.