Dropship from Manufacturer. Average lead time is 48 hours but for the latest lead time, email us
A Scott Aerator Solar Powered System is an ideal solution to provide clean, eco-friendly powered aeration to your pond or lake, regardless of its proximity to electricity. These completely sustainable systems are a cost-effective alternative to a direct-wired power source. Now you can enjoy a clean pond or waterway without having to run expensive electrical lines to remote locations.
2 and 4-panel kits available
Comes standard with 70 feet of heavy-duty, 12-gauge, submersible power cord. Greater lengths are available up to 150 feet.
No maintenance required
Stainless steel, submersible motor is oil-free, making it exceptionally durable, maintenance-free, and the most environmentally-friendly water aerator on the market.
Designed for fresh or salt water
5-year motor warranty
Please disconnect power source when swimmers are present.
Aerator can be left in the pond during the winter, simply turn off the power supply
Proudly manufactured in the USA
Solar Powered DA-20 Display Aerator (2 & 4 Panel) makes beautiful fountains exceptionally eco-friendly.
The Solar Powered DA-20 Display Aerators (2 & 4 Panel) combine clean, eco-friendly aeration with the focal point of a fountain: a spectacular solution for remote spots where running electric power wouldn’t be feasible or cost-effective.
The ½ hp Solar Powered DA-20 (2 Panel) sprays up to 200 gallons of water per minute in a cascading, trumpet-shaped, adjustable pattern measuring about 4 feet tall, and 9 to 15 feet wide.
The Solar Powered DA-20 (4 Panel) sprays up to 300 gallons of water per minute in a cascading, trumpet-shaped, adjustable pattern measuring about 5 feet tall, and 9 to 20 feet wide.
These healthy flow rates do a great job removing algae from the pond surface, maintaining clean and clear water, keeping pesky insects away, and adding a lot of oxygen to your pond. Adding oxygen not only does wonders for your fish, it’s also key to rapidly breaking down decaying matter at the bottom of your pond. Finally, added oxygen means less muck over time.
The stainless steel, submersible motor is oil-free, making it exceptionally durable, maintenance-free, and the most environmentally-friendly water aerator on the market.
Made for daytime aeration, the unit powers up with the sun, operates at variable speeds, and shuts down after dark. Its solar PV array panels bring water flow gradually up to capacity in changing sunlight—all without the costly, high-maintenance batteries that many solar aerators demand.
Like all Scott Aerator Company water features, the DA-20 Solar Aerator was engineered to eliminate the need for costly, time-consuming winterization procedures. Simply leave your aerator in the water, turn off its power supply, and forget about it until the water thaws in the spring. Then just re-establish power to the unit and you’re good to go! All components will withstand sub-zero conditions without damage.
This system comes complete with the DA-20 Display Aerator, two or 4 solar panels with frame, disconnect box, Fhoton™ drive solar inverter, and all required wiring components. You just need to supply the vertical pole for the panels and frame, concrete footing for the pole, and two anchor ropes with weights or tethers for the aerator.
Proudly manufactured in the USA, the DA-20 Solar Aerator carries an unconditional, 5-year motor warranty. It comes standard with 70 feet of heavy-duty, 12-gauge, submersible power cord. Greater lengths are available up to 150 feet.
The unit is designed for fresh or salt water.
Minimum Pond Depth
Default Spray Pattern
Two 325 watt 60-cell solar panels, each high-efficiency, mono-crystaline panel measures 39" x 65".
4 feet H x 7- 15 feet W (Adjustable width)
70 - 200 ft
48 volt, three-phase, 60 Hz, 10.3 amps and 370 watts
Four 325 watt 60-cell solar panels, each high efficiency mono-crystaline panel measures 39" x 65".
5 feet H x 9 - 20 feet W (Adjustable width)
70 - 200 ft
100 Volt, 60 Hz, three-phase, 8.6 amps, 810 watts.
ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.