Scott Aerator Clover Fountains

Scott

$1,889.00

Shipping calculated at checkout

Only 5 left!

1/2 HP
1-1/2 HP


Lucky you: you’ve found the Clover! This efficient fountain creates an impressive cascade of water that sounds as beautiful as it appears. On the 1/2 HP unit, the brass center nozzle of the Clover sprays at heights up to 20 feet, and it’s surrounded by separate side nozzles that create a spectacularly angled spray pattern, projecting water more than 15 feet at a 45-degree angle.  On the 1-1/2 HP unit, the Clover’s main stream will reach a height of 40 feet, while the side nozzles project an amazing 20 feet!

(When purchased with the optional 1½-hp oil-free motor, the Clover’s main stream will reach heights over 40 feet and its side nozzles over 20 feet.)

The Clover fountain not only beautifies your pond but also provides a healthy aquatic environment through oxygen transfer and water circulation.

Like all of the products Scott Aerator manufactures, the Clover utilizes a stainless steel, oil-free, submersible motor, making it the most environmentally friendly style of fountain on the market. The Clover is proudly manufactured in the USA and carries an unconditional, 5-year motor warranty.

This unit comes with 70 feet of submersible, 12-gauge cable. Greater lengths are also available. Optional lights can be ordered too.

GFCI required. Please disconnect the power source when swimmers are present. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.

PLEASE NOTE:  Dropship from Manufacturer.  Average lead time is 48 hours but for the latest lead time, email us

1/2 HP Clover specs:

  • 115-volt, ½-hp, oil-free motor. 230-volt motor also available.
  • 60 gallons of water per minute.
  • Center stream is 20 feet high.
  • Side jets' angled spray pattern extends 15 feet.
  • Electric cable provided is 70 feet in length, 12-gauge submersible, with plug.
  • Electric cable can be ordered in greater lengths, up to 150 feet for 115-volt motor, even longer with 230-volt motor.
  • Light kits can be added later.
  • Approved for use in salt water.
  • Two 20-pound weights or concrete blocks required for anchoring (not included).
  • Two nylon ropes required for anchoring (not included).
  • Designed for 24-hour-per-day operation.
  • No maintenance required.
  • 36-inch minimum pond depth required.
  • Motor specs: 60 Hz, single phase, 10 amps, 680 watts, 115 volts. 230-volt motor also available.
  • 5-year motor warranty.
  • Optional Lights:  2 & 4 Color-Changing Options2 & 4 LED "Night Glo" 
  • ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.

 1-1/2 HP Clover specs:

  • 1½-hp, 230-volt, oil-free motor.
  • 90 gallons of water per minute.
  • Center stream is 40 feet high.
  • Side jets' angled spray pattern is 20 feet.
  • Electric cable provided is 100 feet long, 12-gauge submersible.
  • Electric cable can be ordered in greater lengths.
  • Light kits can be added later.
  • Approved for use in salt water.
  • Two 20-pound weights or concrete blocks required for anchoring (not Included).
  • Two nylon ropes required for anchoring (not included).
  • Designed for 24-hour-per-day operation.
  • No maintenance required.
  • 38-inch minimum pond depth required.
  • Motor specs: 60 Hz, single phase, 10.6 amps, 1780 watts.
  • 5-year motor warranty.
  • Optional Lights:  2 & 4 Color-Changing Options2 & 4 LED "Night Glo" 
  • ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. 

Related Information

Anchoring Instructions

Owner's Manual

Fountain Comparison Guide