Anjon™ LandShark™ Self-Priming External Pond Pumps

Anjon™ SKU: LS2000

$354.92

Shipping calculated at checkout

  • This self-priming heavy-duty external water pump delivers outstanding reliability and performance.
  • Low maintenance, vibration free operation. Self-priming pump. Hydraulically self-balancing impeller. Self-lubricating direct drive motor.
  • Debris? Clog-free! Built-in removable over-sized debris basket traps twigs and leaves. Inspect and clean easily thanks to clear, quick release cover.
  • Built to last. High quality seals and bearings for long efficient motor life. Thermal sensor keeps pump from overheating.
  • Cord length: 4 ft
  • 2-Year Warranty
  • Owner's Manual
  • Pump Curves

Note: For LS-2000 and LS-3300 pumps if you are using 2" pipe, you would need an adapter that works up from a 1.5" slip.   To obtain this, you could use both a 478-015 adapter to go from 1.5" slip to 1.5" FPT and then to use the 436-213 adapter to go from 1.5" MPT to 2" SLIP.    To order both of those adapters, there is an option in the dropdown menu.  

 

Model  Max Flow Dimensions (LxWxH): Max Head  Watts Amps Voltage Input/Output Recommended Hose
LS2000 2000 GPH 7" x 20.5" x 10" 20' 250 3 120 V/ 60 Hz 1.5" Slip 2" Diameter or 1.5" diameter if using a short length - Use 437-251 fitting 
LS3300 3300 GPH 7" x 20.5" x 10" 24' 400 5
LS4600 4750 GPH 7.5" x 21" x 12" 32' 550 6.2 1.5" FPT  1.5" Slip
LS5500 5575 GPH 7.5" x 21" x 12" 40' 1100 9.2




Questions & Answers

Have a Question?

Ask a Question
  • Do you have a manual on the LS2000 in more detail then the one I received with this pump? I am looking for a manual that is more detailed including a schematic sketch of the pump including a parts list which would include definitions to better understand your Troubleshooting section especially the Low Flow-Check For. I want to know if the installer put the right size piping/plumbing, how to get to the impeller etc; because I do not think this pump was put together properly because all we can get is a trickle of water out of this installation and poor service when we ask for assistance. Thank You, Richard

    Hello Richard-

    I was not able to obtain any schematics from Anjon but Anjon recommends a 2" pipe or 1.5" if it is a short run.  This sounds like maybe the pump hasn't been properly primed.  These pumps are designed to be a water level and not below water level.