Matala Lake Aeration Rocking Piston Compressors - Ponds Up to 4 Acres

$334.00

SKU: MPC-60A

Ideal compressors for deeper ponds or lakes.  

  • Max pressure up to 50 psi. (Pressure relief valve functions at 40 psi
  • Oil-less non-lube piston and cylinder
  • Permanently lubricated bearings
  • Lightweight die-cast aluminum components
  • Cyclinder hard coated for wear resistance
  • Head design allows for replacement of piston seal
  • Balanced for smooth, low vibration operation
  • Grid sturctured front cover for safety protection
  • Easy handling accessories set
  • Want to have this aeration kit with a cabinet?   
  • Spare parts and related accessories are located at the bottom of this page.
Matala Rocking Piston Compressor Specs

The Highlights of the Differences Between the Models

Models ending in "A", MPC-60A, MPC-120A, and MPC-200A only include an air filter.  See pictures as they are labeled with each model.

Models ending in "C", MPC-60C, MPC-120C, and MPC-200C include oil-filled pressure gauge, pressure relief valve, heat-resistant tube and aluminum manifold with swivel union.

Model MPC-60C is a 1/4 HP, single head and includes a 2-way valve aluminum manifold, Model MPC-120C is a 1/2 HP, double head and includes a 3-way valve aluminum manifold, Model MPC-200C is a 3/4 HP, double head and includes a 4-way aluminum manifold

More detailed information on each model is below:

MPC-60A 1/4 HP Rocking Piston Compressor
  • MPC-60A 1/4 HP Rocking Piston Compressor single head with air filter only. 
  • This stand alone compressor can be installed in a variety of applications. 
  • Adapt to your existing system or create a custom system. 
  • For aerating ponds up to 1 acre.
MPC-120A 1/2 HP Rocking Piston Compressor
  • MPC-120A 1/2 HP Rocking Piston Compressor double head with air filter only. 
  • This stand alone compressor can be installed in a variety of applications. 
  • Adapt to your existing system or create a custom system. 
  • For aerating ponds up to 2 acres.
MPC-200A  3/4 HP Rocking Piston Compressor
  • MPC-200A 3/4 HP Rocking Piston Compressor double head with air filter only. 
  • This stand alone compressor can be installed in a variety of applications. 
  • Adapt to your existing system or create a custom system. 
  • For aerating ponds up to 4 acres.

MPC-60C

This is the 1/4 HP compressor and air filter (MPC-60C) combined with a 2 way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

      • 1/4hp; 115v; 60 Hz
      • Max amps 2.27 @115V; 226 watts
      • Max pressure 50 feet deep, 17.34 psi
      • 2 way 3/8" manifold valve.
      • Oil filled pressure gauge
      • Pressure relief valve
      • Heat protection hose.
      • OIl-less non lube piston and cylinder.
      • Cylinder hard coated for wear resistance.
      • Head design allows for easy replacement of piston seal.
      • Permanently lubricated bearings.
      • Balanced for smooth low vibration operation.
      • Safety protected.

To help prevent overheating, please follow these recommendations:

    • only use in water less than 50 feet deep
    • Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.
    • use 2 way manifold and 2 hoses

MPC-120C

This is the 1/2 HP compressor and air filter (MPC-120C) combined with a 3 way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

  • 1/2hp; 115v; 60 Hz
  • Max amps 3.81 @115V; 433watts
  • Max pressure 50 feet deep, 17.34 psi
  • 3 way 3/8" manifold valve.
  • Oil filled pressure gauge
  • Pressure relief valve
  • Heat protection hose.
  • OIl-less non lube piston and cylinder.
  • Cylinder hard coated for wear resistance.
  • Head design allows for easy replacement of piston seal.
  • Permanently lubricated bearings.
  • Balanced for smooth low vibration operation.
  • Safety protected

To help prevent overheating, please follow these recommendations:

  • only use in water less than 50 feet deep
  • Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.
  • use 3 way manifold and 3 hoses

MPC-200C

This is the 3/4 HP compressor and air filter (MPC-200C) combined with a 4 way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

  • 3/4hp; 115v; 60 Hz
  • Max amps 5.4 @115V; 597 watts
  • Max pressure 50 feet deep, 17.34 psi
  • 4 way 3/8" manifold valve.
  • Oil filled pressure gauge
  • Pressure relief valve
  • Heat protection hose.
  • OIl-less non lube piston and cylinder.
  • Cylinder hard coated for wear resistance.
  • Head design allows for easy replacement of piston seal.
  • Permanently lubricated bearings.
  • Balanced for smooth low vibration operation.
  • Safety protected.

To help prevent overheating, please follow these recommendations:

  • only use in water less than 50 feet deep
  • Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.
  • use 4 way manifold and 4 hoses

Related Parts/Information

Owner's Manual

Re-build Kit

Accessory Kits

Replacement Air Filters