Anjon™ LandShark™ Self-Priming External Pond Pumps

Anjon™ SKU: LS2000

$285.66

Shipping calculated at checkout

  • This self-priming heavy-duty external water pump delivers outstanding reliability and performance.
  • Low maintenance, vibration free operation. Self-priming pump. Hydraulically self-balancing impeller. Self-lubricating direct drive motor.
  • Debris? Clog-free! Built-in removable over-sized debris basket traps twigs and leaves. Inspect and clean easily thanks to clear, quick release cover.
  • Built to last. High quality seals and bearings for long efficient motor life. Thermal sensor keeps pump from overheating.
  • 2-Year Warranty
  • Owner's Manual
  • Pump Curves

Note: For LS-2000 and LS-3300 pumps if you are using 2" pipe, you would need an adapter that works up from a 1.5" slip.   To obtain this, you could use both a 478-015 adapter to go from 1.5" slip to 1.5" FPT and then to use the 436-213 adapter to go from 1.5" MPT to 2" SLIP.    To order both of those adapters, there is an option in the dropdown menu.  

 

Model  Max Flow Max Head  Watts Amps Voltage Input/Output Recommended Hose
LS2000 2000 GPH 28' 250 3 120 V/ 60 Hz 1.5" Slip 2" Diameter or 1.5" diameter if using a short length - Use 437-251 fitting 
LS3000 3300 GPH 35' 400 5
LS4600 4750 GPH 32' 550 6.2 1.5" FPT  1.5" Slip
LS5500 5575 GPH 40' 1100 9.2




Questions & Answers

Have a Question?

Ask a Question
  • Do you have a manual on the LS2000 in more detail then the one I received with this pump? I am looking for a manual that is more detailed including a schematic sketch of the pump including a parts list which would include definitions to better understand your Troubleshooting section especially the Low Flow-Check For. I want to know if the installer put the right size piping/plumbing, how to get to the impeller etc; because I do not think this pump was put together properly because all we can get is a trickle of water out of this installation and poor service when we ask for assistance. Thank You, Richard

    Hello Richard-

    I was not able to obtain any schematics from Anjon but Anjon recommends a 2" pipe or 1.5" if it is a short run.  This sounds like maybe the pump hasn't been properly primed.  These pumps are designed to be a water level and not below water level.