EFB26 26" Fountain Basin
Roto-Molded for Superior Strength!
- Ships complete and is engineered to be self-supporting, so no cement blocks or other props are needed to support the grating
- Has the thickest, strongest grating of any similar product and features a pump access door for easy pump removal/service
- 15-gallon capacity
   Measures 26″ x 26″ and is 12″ deep. Ideal for small statues, vases or rocks where splash is minimal. Mag drive pumps from 120 GPH to 600 GPH are recommended
Dimensions:Â 26"W x 26"L x 12"H
Â
FB28E Eco-Series Basin – 28" Diameter w/ molded support grating
Molded support grates have multiple legs for increased load capacity
- Ideal for use with concrete statuary, vases, rocks and fountains
- Two-part basin with bottom tub and molded center section
- Molded center section has three built in legs for support
- Removable pump access door
- Roto-molded for superior strength
- 19-gallon capacity
Dimensions:Â Â 28" diameter x 12" tall
Questions & Answers
Have a Question?
-
How do I calculate the proper splash area so all the water doesn't splash out?
Typical splash zones extend from the source as far out as the feature is tall. A 3' tall feature may splash out 3' in every direction, a 6' diameter splash zone.
For in-ground installations taller than 23" or to capture splash from tall drops or excessively rough surfaces, consider creating a liner 'skirt' around the basin or reservoir.
If splash is caused by water impacting the surface of the basin or reservoir, place a splash mat on the horizontal surface where water is falling to capture and suppress any splash.
-
Hi, how much weight can this support?
The amount of weight that can be supported by a basin varies. Specific weight ratings for basins are often not published because there are several variables that can occur in the field that could cause a unit to not meet a rating specification. It's important to remember that the basin is not designed primarily to support weight, but rather to transfer the weight through the unit to the ground beneath it. For example, a heavy rock or vase with a 1-foot diameter footprint places more stress on a basin than a rock or vase of the same weight with a 3-foot diameter footprint. The center supports of some basins can be filled with concrete to provide additional support, on other basins cinder blocks can be used between the grate and basin floor to help transfer the weight through the basin. A basin that is installed on well compacted soil, backfilled tightly around the edges and provided additional support such as blocks, or concrete filled support to transfer the weight through the basin will perform the best over the life of the water feature.ÂIn general the max weight for an EFB26 basin is 150 lbs. For the FB28E max weight is also 150 lbs with additional support, such as filling the columns in the lid with cement to transfer the weight to the ground underneath. Â
Recommended for the EasyPro™ Heavy Duty Fountain Basins
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor