Matala Lake Aeration Rocking Piston Compressors - Ponds Up to 4 Acres

Ideal compressors for deeper ponds or lakes.  

• Max pressure up to 50 psi. (Pressure relief valve functions at 40 psi
• Oil-less non-lube piston and cylinder
• Permanently lubricated bearings
• Lightweight die-cast aluminum components
• Cylinder hard-coated for wear resistance
• Head design allows for replacement of piston seal
• Balanced for smooth, low vibration operation
• Grid structured front cover for safety protection
• Easy handling accessories set
• Want to have this aeration kit with a cabinet?   
• Replacement cabinets and accessories can be ordered here.
• Spare parts and related accessories are located at the bottom of this page.

The Highlights of the Differences Between the Models

Models ending in "A", MPC-60A, MPC-120A, and MPC-200A only include an air filter.  See pictures as they are labeled with each model.

Models ending in "C", MPC-60C, MPC-120C, and MPC-200C include oil-filled pressure gauge, pressure relief valve, heat-resistant tube and aluminum manifold with swivel union.

Model MPC-60C is a 1/4 HP, single head and includes a 2-way valve aluminum manifold, Model MPC-120C is a 1/2 HP, double head and includes a 3-way valve aluminum manifold, Model MPC-200C is a 3/4 HP, double head and includes a 4-way aluminum manifold

More detailed information on each model is below:

• MPC-60A 1/4 HP Rocking Piston Compressor single head with air filter only. 
• This stand-alone compressor can be installed in a variety of applications. 
• Adapt to your existing system or create a custom system. 
• For aerating ponds up to 1 acre.

MPC-60C

This is the 1/4 HP compressor and air filter (MPC-60C) combined with a 2 way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

• 1/4hp; 115v; 60 Hz
• Max amps 2.27 @115V; 226 watts
• Max pressure 50 feet deep, 17.34 psi
• 2 way 3/8" manifold valve.
• Oil filled pressure gauge
• Pressure relief valve
• Heat protection hose.
• OIl-less non lube piston and cylinder.
• Cylinder hard coated for wear resistance.
• Head design allows for easy replacement of piston seal.
• Permanently lubricated bearings.
• Balanced for smooth low vibration operation.
• Safety protected.

To help prevent overheating, please follow these recommendations:

• only use in water less than 50 feet deep
• Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.
• use 2 way manifold and 2 hoses
• compressors require a cooling fan and must have sufficient room for proper heat dissipation.  

MPC-120C

This is the 1/2 HP compressor and air filter (MPC-120C) combined with a 3 way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

• 1/2hp; 115v; 60 Hz
• Max amps 3.81 @115V; 433watts
• Max pressure 50 feet deep, 17.34 psi
• 3 way 3/8" manifold valve.
• Oil filled pressure gauge
• Pressure relief valve
• Heat protection hose.
• OIl-less non lube piston and cylinder.
• Cylinder hard coated for wear resistance.
• Head design allows for easy replacement of piston seal.
• Permanently lubricated bearings.
• Balanced for smooth low vibration operation.
• Safety protected

To help prevent overheating, please follow these recommendations:

• only use in water less than 50 feet deep
• Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.
• use 3 way manifold and 3 hoses
• compressors require a cooling fan and must have sufficient room for proper heat dissipation.