Airmax® Remote Manifold Kit

Airmax® SKU: 600192

$349.99

Tax includedShipping calculated at checkout

Only 5 left!

The Remote Manifold Kit is designed for use with any Airmax aeration system located away from the pond's edge. Allowing pond owners to run a single line from the power source to the edge of the pond and make air flow adjustments while in view of the diffusers. Making it easier to balance each diffuser plate without having to run back and forth from the cabinet to the pond. All kits (this does not include individual valve boxes - 490369 or 490308) include a junction valve box (17″L x 12″W x 6″D), remote manifold and fittings to connect to 1″ direct burial (poly) tubing or PVC pipe.

How to Install

Use the Junction/Valve Box at the location of the aeration cabinet. To install dig a level hole about 13" x 18" x 6" using a shovel, then place the junction box to check size and fitting. Feed the flex tubing connected to the compressor below one side of the junction/valve box or feed the tubing through the pre-drilled holes in the box. Set the aeration cabinet over the Junction/Valve Box and connect your airline to the flex tubing that is still connected to the compressor. Once all tubing and airline have been attached and secured, backfill dirt around the box.